Residential · Kissimmee, FL
A concrete pool deck has to drain fast, stay cooler underfoot, and hold up to constant water and chemicals. Kissimmee Quality Concrete has served Kissimmee since 2016, pouring and resurfacing pool decks that are clean, slip-resistant, and built on a stable base.
We start with layout, demo as needed, and proper subgrade prep so the slab does not settle or rock at the edge. Our crew strips organics, proofs the grade, and compacts the base with a plate compactor, then installs a graded road base that is moisture-conditioned and compacted in lifts. Forms are set for consistent thickness (typically 4 inches, thicker at equipment pads and load points), with control joints planned to manage shrinkage cracking. When reinforcement is specified, we use #3 or #4 rebar and chairs, or 6x6 W2.9 welded wire mesh, and we isolate the deck from the pool shell with expansion joint material to prevent bond and spalling.
Central Florida heat and sudden rain change how concrete is placed, finished, and cured, especially around pools. We choose a mix designed for exterior flatwork, typically 3,000-4,000 psi with air control as needed, and we time the pour to avoid washouts and rapid surface dry-out. To help with slip resistance and comfort, we finish pool decks with options like broom-finish, light swirl, or a textured overlay, and we can add integral color or a broadcast color hardener for a more uniform look. Drainage is set with positive slope away from the pool and home (about 1/8 inch per foot where conditions allow), and joints are tooled and sealed where appropriate to reduce water intrusion and freeze-thaw risk during cold snaps.
Homeowners and businesses choose Kissimmee Quality Concrete because we treat pool work like specialty flatwork, not a generic sidewalk pour. You get clear scope, written measurements, and straight answers on thickness, reinforcement, and finish so you can compare bids correctly. Our crew uses professional forming, rebar tying tools, concrete vibrators where needed, and saw-cut equipment for clean control joints, with jobsite protection for screens, pavers, and landscaping. We keep the work area organized and communicate around pool access, pump schedules, and safety so your property stays usable and secure.
Before we call it complete, we walk the deck with you and check slope, joint placement, edge lines, and surface texture for consistent traction. We explain cure time, initial set expectations, and when it is safe to reopen the area to foot traffic and furniture, plus guidance for sealing and routine cleaning around chlorine and salt systems. You receive a finished concrete pool deck with proper base compaction, reinforced slab where specified, clean transitions to coping and existing slabs, and a predictable maintenance plan. If you are replacing a failing deck, we also document what caused the damage, like voids, poor drainage, or missing isolation joints, so the new work lasts longer.
Yes. We provide a free written estimate after an on-site measure and review of grades, access, and existing conditions.
Light foot traffic is often possible within 24-48 hours, but vehicle traffic typically needs longer curing time. We give project-specific guidance based on thickness, weather, and finish.
Yes. We handle saw-cutting, demolition, and haul-off, then rebuild the base and re-pour to the specified thickness and finish.
Yes. We can re-grade, adjust slopes, and plan downspout and runoff paths so water sheds away from slabs and foundations.
Common options include broom-finish, smooth trowel, light texture, and edge detailing. We will recommend the finish that fits safety, appearance, and use.
A well-built concrete pool deck is more than a clean border around the water, it is a safety surface and a drainage system. Kissimmee Quality Concrete designs and installs pool deck concrete that resists settling, manages runoff, and stays slip-resistant with the right texture and joint layout. Whether you need a new pour, a replacement over failed concrete, or a resurfacing upgrade, we focus on base prep, reinforcement, and finishes that hold up to sun, rain, and pool chemicals.
Most pool deck failures start below the slab. Soft subgrade, thin sections, and missing isolation joints can lead to rocking, cracks at the pool edge, and spalling where water sits. We excavate to sound material, compact a graded base, and form for consistent thickness, then place concrete designed for exterior flatwork (often 3,000-4,000 psi). Control joints are spaced and cut correctly, and we isolate the deck from the pool shell and adjacent structures to reduce stress transfer.
Finish matters around water. A smooth steel-trowel finish can get slick and show every blemish, so we recommend a broom-finish, swirl, or textured overlay depending on your preferred look and how you use the space. If you want more visual impact, we can add integral color or apply a resurfacing system over properly prepared concrete, then seal where appropriate for easier cleaning. We will review cure time, furniture placement, and chemical splash considerations so the deck performs and stays easy to maintain over the long term.
If you are planning a new concrete pool deck or replacing cracked, uneven sections, we will provide a free written estimate with clear specs on thickness, reinforcement, finish, and schedule. You will know exactly what is included, what prep is required, and how we will protect nearby surfaces during the pour and cut-in work.
Call now or send a request and we will reach out within one business day to schedule your free, no-obligation estimate in Kissimmee. We assess the project, review the details, and give you a written quote before any work starts, so you know exactly what to expect.
Prefer to write? Contact us or head back to the home page.
